What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 26.06.2025 03:15
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
He then asserts :
There are two important concepts here.
Edit 2024–10.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
I post the exact comment here.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
The other is “what does a “fuse” do?”
2024–10–16 [ OO OLAOYE OYEBODE ]
7 storylines to watch with All-Star voting underway - MLB.com
It seems Mohan does not understand the difference between a comment and an Answer.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Now when you have a certain ac resistance, then a current flows in a loop.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
One is “what exactly is in a ‘surge protector’ ? ”
so, what happens?
When gallery photos are deleted at the same time, why are Google photos also deleted?
Because the load is inductive, the current lags the voltage.(by a bit).
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
(Dc diagram shown, AC is similar).
China extracts critical mineral rubidium from brine for first time - South China Morning Post
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
what exactly is a ‘surge’ protector?
but I think this circuit , shows a few more pieces.
A circuit breaker is similar, but is resettable.
The third is lightning and “how it gets conducted into a home.”
NAR Existing-Home Sales Report Shows 0.8% Increase in May - National Association of REALTORS®
a photo is worth a thousand words.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
What bait should you use for ocean fishing?
Upvotes:
Barnstars:
A fuse is a non-resetable over current circuit protector.
the problem then depends on "how fast does the fuse operate?".
[old diagram got deleted by accident]
but this device (an Inductor) … impedes the rapid changes in the current.
Scientists have discovered 'third state' between life and death - WKRC
These are simplified answers to the original question, and does not change anything I wrote above.
2024–10–10[John johnson John Johnson ]
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
The nine-armed octopus and the oddities of the cephalopod nervous system - Ars Technica
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
There are three different concepts here that are getting confused.
The MOV will conduct when the voltage exceeds 50% of line voltage.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
[image of Common-mode choke]
It also is a device that limits the change in current flow.
In schematic diagrams this is the symbol for a fuse:
First Sentence:
An AC voltage/ current source, and an ac inductive load.
One
Here is a simplified AC power diagram.
This one hit behind the barn.
At one ohm, the resistor has a maximum of 1 watt power.
What does a fuse do?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
This device then solves the entire problem.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
But it can get overloaded, and no longer works.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
So, the voltage could go up to 500 volts, and the fuse will not open up.
These devices are installed between the “hot” and “neutral” and protective ground.
He then describes the function of a fuse.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
But… the neutral is now “floating” because of the 1 ohm resistance.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
This is where this question deviates from being a 'generic' question, and becomes more specific.
This is where the MOV conducts again, and dissipated the energy.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
This is 'the assistant's answer'
He then describes Rainy Season and Lightning.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
nine
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
For this case there are devices called Metal oxide varistors (MOV).
2024–10–14 [Omar Gharbi Omar Gharbi ]
What is lightning?
The bolt then partially travels down the line to your home.
At least they know the answer if they wanted it.
eight
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.